Services

Fluid-Applied Air Barriers

Fluid-applied air barriers are designed to create a continuous, durable membrane that helps control air leakage throughout the building envelope. By reducing unwanted airflow, these systems contribute to improved indoor comfort, enhanced energy efficiency, and better overall building performance.

Our team applies high-quality fluid-applied air barrier systems to a variety of substrates, ensuring proper adhesion and seamless coverage around complex architectural details. From new construction projects to renovation work, we focus on precise installation methods that help protect structures from moisture intrusion while supporting long-term durability.

Hot Fluid-Applied Membranes

Hot fluid-applied membranes provide a high-performance waterproofing solution designed to create a fully bonded, seamless barrier against water intrusion. Applied in a heated liquid state, the system cures to form a durable, monolithic membrane that tightly adheres to the substrate. This makes it especially effective for complex structural details, transitions, and areas that require long-term waterproofing reliability under demanding conditions.

Our team applies hot fluid-applied membrane systems with precision to ensure complete coverage and consistent thickness across the surface. This method is widely used in both new construction and rehabilitation projects where superior waterproofing performance and durability are essential. The system is designed to resist water penetration, reduce maintenance needs, and extend the service life of building components.

Cold Fluid-Applied Membranes

Cold fluid-applied membranes are advanced waterproofing systems designed to provide a seamless and flexible protective layer without the need for heat during application. Once applied, the liquid material cures to form a durable, fully bonded membrane that effectively resists water intrusion while accommodating normal structural movement. This makes it an ideal solution for a wide range of roofing, below-grade, and exposed waterproofing applications.

Our team installs cold fluid-applied membrane systems with careful attention to detail to ensure uniform coverage and strong adhesion to the substrate. This system is especially effective for projects that require safe, efficient installation in sensitive environments or where heat-based methods are not suitable. It delivers long-lasting protection against moisture, weather exposure, and structural wear.

PUMA or PMMA Coatings

PUMA (Polyurethane Modified Acrylic) and PMMA (Polymethyl Methacrylate) coatings are high-performance waterproofing and protective systems designed for areas that demand rapid curing, extreme durability, and long-term resistance against weathering and chemical exposure. These advanced resin-based systems form a seamless, highly elastic membrane that adapts well to structural movement while providing strong protection against water ingress and surface degradation.

Our team applies PUMA and PMMA coating systems with precision to ensure consistent curing, strong adhesion, and long-lasting performance. These systems are particularly effective for complex detailing areas, high-traffic zones, and projects requiring fast turnaround times due to their quick curing properties. They are widely used in roofing, balconies, podiums, and exposed structural surfaces where durability is critical.

Expansion Joints

Expansion joints are essential components in building structures designed to safely absorb movement caused by temperature changes, seismic activity, shrinkage, and structural load variations. Without properly designed and sealed expansion joints, buildings are at risk of cracking, water intrusion, and long-term structural damage. Our expansion joint systems are engineered to maintain flexibility while ensuring a durable, watertight seal across critical movement areas.

Our team specializes in the installation, repair, and replacement of expansion joint systems for both new construction and restoration projects. We use high-quality materials designed to withstand continuous movement while maintaining long-term performance. Each installation is carefully detailed to ensure proper alignment, adhesion, and protection against environmental exposure.

Site Sealants

Site sealants are a critical part of any building envelope system, designed to seal joints, gaps, and connection points where different building materials meet. These areas are highly vulnerable to water intrusion, air leakage, dust penetration, and structural movement. Properly applied sealants ensure a continuous protective barrier that enhances building durability, energy efficiency, and long-term performance.

Our site sealant solutions are suitable for a wide range of construction applications, including concrete joints, façade connections, window perimeters, metal cladding, and structural interfaces. We use high-performance, flexible sealant systems that maintain adhesion and elasticity under changing weather conditions and constant structural movement.

Striping

Striping is a specialized protective and finishing process used in construction to create durable, visible, and functional surface markings on various structural and paving areas. It plays a key role in improving safety, organization, and long-term surface performance by clearly defining movement paths, boundaries, and designated zones. Proper striping also helps protect coated surfaces and enhances overall site management and visual clarity.

Our striping services are commonly used in commercial, industrial, and parking structures where clear markings are essential for traffic control and safety compliance. We use high-quality, long-lasting materials designed to withstand heavy traffic, weather exposure, and continuous wear without fading or deterioration.

Clear Penetrating Sealers

Clear penetrating sealers are high-performance protective treatments designed to absorb deep into concrete and masonry surfaces, creating an invisible barrier against water, moisture, and contaminants. Unlike surface coatings, these sealers do not form a film on top but instead chemically bond within the substrate to provide long-lasting protection while maintaining the natural appearance of the surface.

These sealers are widely used in both residential and commercial construction to extend the life of concrete, brick, stone, and other porous materials. By reducing water absorption, they help prevent cracking, spalling, staining, and freeze-thaw damage, while also improving resistance to salts, oils, and environmental pollutants.

Elastomeric Coatings

Elastomeric coatings are highly flexible, protective membrane systems designed to expand and contract with building surfaces without cracking or losing adhesion. These coatings form a seamless, weather-resistant barrier that protects exterior walls and roofing surfaces from water intrusion, UV exposure, and environmental wear. Their elastic properties make them ideal for structures exposed to movement, temperature fluctuations, and harsh weather conditions.

Widely used in both residential and commercial construction, elastomeric coatings help extend the life of building exteriors while improving waterproofing performance. They are especially effective on concrete, stucco, masonry, and other porous surfaces where micro-cracks can develop over time.

Pavers and Pavers on Pedestals

Pavers and pedestal paver systems are modern surfacing solutions designed to create durable, functional, and visually appealing walking and rooftop surfaces. Traditional paver systems provide strong, stable ground coverage for plazas, walkways, and outdoor spaces, while pedestal-supported systems elevate pavers above the substrate, allowing for effective drainage, easy access to underlying utilities, and improved waterproofing performance.

These systems are widely used in commercial rooftops, terraces, plazas, and landscaped areas where both aesthetics and performance are essential. When installed correctly, they help protect the underlying waterproofing membrane while ensuring a level, stable, and long-lasting walking surface.

Pre- and Post-Applied Below-Grade Waterproofing

Pre- and post-applied below-grade waterproofing systems are specialized solutions designed to protect underground and foundation structures from water ingress and soil moisture. These systems are applied either before concrete is poured (pre-applied) or after the structure is formed (post-applied), creating a continuous, seamless barrier that prevents water penetration at the most critical structural levels.

These waterproofing methods are essential in basements, foundations, retaining walls, tunnels, and podium slabs where hydrostatic pressure and ground moisture can cause serious long-term damage. By providing robust protection below ground level, they help maintain structural integrity, reduce maintenance costs, and extend the lifespan of the building.

Damp Proofing

Damp proofing is an essential protective treatment designed to prevent moisture from rising or penetrating into building structures through walls, floors, and foundations. It creates a barrier that controls capillary action and moisture migration, helping to protect interior spaces from dampness, mold growth, peeling paint, and structural deterioration.

This system is commonly used in residential, commercial, and industrial construction where ground moisture and humidity can affect building performance. Proper damp proofing improves indoor air quality, extends the life of building materials, and ensures a healthier and more durable structure.

Joint Sealants

Joint sealants are essential materials used to seal gaps, joints, and connection points between different building components, ensuring a continuous barrier against water, air, dust, and environmental exposure. These sealants are designed to accommodate structural movement caused by thermal expansion, vibration, and settlement while maintaining a strong, flexible, and watertight seal.

They are widely used in commercial, industrial, and residential construction to protect the building envelope and enhance overall durability. Proper joint sealing helps prevent water intrusion, reduces energy loss, and minimizes long-term structural damage in critical interface areas.

Grout Injections

Grout injection is a specialized waterproofing and structural repair method used to fill cracks, voids, and cavities within concrete and masonry structures. This technique involves injecting high-performance grout materials under pressure to seal water pathways, restore structural integrity, and strengthen weakened areas without the need for major demolition or reconstruction.

It is widely used in basements, foundations, retaining walls, tunnels, and other below-grade structures where water leakage and structural voids can compromise performance. Grout injection provides a cost-effective and efficient solution for stopping active leaks and reinforcing damaged structures.

Cementitious Crystalline Coatings

Cementitious crystalline coatings are advanced waterproofing systems designed to protect concrete structures by forming insoluble crystals within the pores and capillaries of the substrate. When applied, these coatings react with moisture and unhydrated cement particles to create a permanent crystalline structure that blocks water pathways while still allowing the concrete to breathe.

These systems are widely used in basements, water tanks, tunnels, retaining walls, and below-grade structures where long-term waterproofing and durability are essential. They provide deep, integral protection that becomes part of the concrete itself, making them highly effective for both new construction and remedial waterproofing applications.

Sheet Metal Flashing and Trim

Sheet metal flashing and trim are essential components of a building envelope system, designed to direct water away from critical joints and prevent moisture intrusion at vulnerable transition points. These metal elements provide durable protection at roof edges, wall intersections, openings, and other structural details where water could otherwise penetrate and cause damage.

Properly installed flashing and trim not only enhance waterproofing performance but also improve the overall finish, durability, and weather resistance of a structure. They are commonly used in both commercial and residential construction to ensure long-term protection and clean architectural detailing.

Traffic Coatings

Traffic coatings are high-performance protective systems designed to withstand heavy foot and vehicle traffic while protecting underlying concrete surfaces from water, chemicals, abrasion, and wear. These coatings create a seamless, durable, and slip-resistant surface that enhances both safety and longevity in high-use areas.

They are commonly applied in parking structures, ramps, podium decks, industrial floors, and commercial walkways where constant movement and exposure to environmental stress can lead to rapid surface deterioration. Traffic coatings also help prevent water penetration, reducing the risk of corrosion and structural damage.

Stucco, Masonry, and Metal Panel Patching or Repairs

Stucco, masonry, and metal panel patching and repair services are essential for restoring the integrity, appearance, and performance of building exteriors. Over time, exposure to weather, moisture, movement, and structural stress can cause cracks, corrosion, spalling, or panel damage. Proper repair work helps prevent further deterioration while maintaining the building’s protective envelope.

These restoration services are commonly used in commercial, residential, and industrial structures to address localized damage without requiring full system replacement. By using compatible repair materials and proven techniques, we ensure long-lasting results that blend seamlessly with existing finishes and restore full functionality.

Demolition and Haul-Off

Demolition and haul-off services involve the safe, controlled removal of existing structures, building components, or damaged materials to prepare a site for new construction or renovation. This process is carried out with careful planning to ensure structural safety, minimize disruption, and comply with environmental and site regulations.

These services are commonly required in both commercial and residential projects where outdated, unsafe, or deteriorated elements must be removed before waterproofing, repairs, or new construction can begin. Proper haul-off ensures that all debris is efficiently cleared and disposed of in an environmentally responsible manner.

Concrete Patching and Repairs

Concrete patching and repair services are essential for restoring damaged, cracked, or deteriorated concrete surfaces to their original strength, appearance, and performance. Over time, concrete structures can suffer from spalling, cracking, surface wear, and moisture intrusion due to environmental exposure, load stress, or poor installation. Proper repair work helps prevent further deterioration and extends the service life of the structure.

These services are widely used in commercial, residential, and industrial construction to maintain the integrity of floors, slabs, walls, and structural elements. Using high-quality repair materials and proven application methods ensures strong bonding with existing concrete and long-lasting durability.

Bearing Pad Replacement

Bearing pad replacement is a specialized structural maintenance service designed to restore proper load transfer, movement accommodation, and stability in concrete and steel structures. Bearing pads are critical components placed between structural elements such as beams, girders, and supports to absorb loads, reduce stress, and allow controlled movement. Over time, these pads can deteriorate due to aging, compression, environmental exposure, or heavy structural loads, leading to misalignment and potential structural issues.

Timely replacement of bearing pads helps maintain the safety, performance, and longevity of bridges, parking structures, buildings, and industrial facilities. Our team ensures precise removal and installation using engineered materials that meet project requirements and structural standards.

Pressure Washing

Pressure washing is a high-efficiency cleaning method used to remove dirt, grime, mold, mildew, and surface contaminants from various exterior building surfaces. It plays an important role in surface preparation before waterproofing, coating, or repair work, ensuring proper adhesion and long-lasting performance of applied systems.

This service is commonly used on commercial, residential, and industrial properties to restore the appearance and cleanliness of concrete, masonry, metal, and other exterior surfaces. Regular pressure washing also helps maintain building aesthetics and prevents the buildup of harmful contaminants that can cause long-term surface damage.

Window Cleaning

Window cleaning is a professional maintenance service designed to restore clarity, shine, and appearance to glass surfaces while ensuring long-term protection against dirt, dust, water spots, and environmental buildup. Clean windows not only improve the visual appeal of a building but also enhance natural light and overall indoor environment quality.

This service is essential for commercial, residential, and high-rise buildings where exterior glass surfaces are exposed to weather conditions, pollution, and debris. Regular professional cleaning helps maintain glass integrity and prevents permanent staining or etching over time.

Historical Restoration

Historical restoration is a specialized construction service focused on preserving, repairing, and restoring heritage buildings while maintaining their original architectural character and structural integrity. It requires careful attention to detail, material compatibility, and traditional craftsmanship to ensure that the building’s historic value is protected while improving its durability and functionality.

This service is commonly applied to landmark structures, heritage sites, and older buildings that require sensitive rehabilitation due to aging, weathering, or structural deterioration. The goal is to restore the original appearance and strength of the structure while integrating modern protection systems where needed.

Retaining Walls

Retaining wall systems are structural solutions designed to hold back soil, manage elevation changes, and provide stable support for landscapes, foundations, and infrastructure projects. They play a critical role in preventing soil erosion, controlling water drainage, and maintaining the integrity of sloped or uneven terrain.

These systems are widely used in residential, commercial, and civil construction projects such as parking areas, basements, roadways, and landscaped developments. Properly designed and constructed retaining walls ensure long-term stability while also improving site usability and safety.

Concrete Site Work

Concrete site work is a fundamental part of construction that involves the preparation, placement, and finishing of concrete elements that support the functionality and durability of a project. From foundations and slabs to walkways and site infrastructure, quality concrete work provides the strength and stability required for long-term performance.

These services are essential for residential, commercial, and industrial developments where durable concrete surfaces and structural components are needed. Proper planning, grading, and installation help ensure that site improvements meet project specifications while withstanding heavy use and environmental conditions.

Tank or Cistern Waterproofing

Tank and cistern waterproofing is a specialized protective system designed to prevent water leakage, contamination, and structural deterioration in water-retaining structures. These systems ensure that tanks and cisterns remain completely sealed, hygienic, and structurally sound by creating a durable barrier against water ingress and seepage.

This service is essential for both potable and non-potable water storage structures in residential, commercial, and industrial facilities. Proper waterproofing helps maintain water quality, prevents structural damage, and extends the service life of storage systems exposed to constant moisture and hydrostatic pressure.

Balcony Waterproofing

Balcony waterproofing is a critical protection system designed to prevent water penetration through balcony surfaces, slabs, and adjoining wall connections. Balconies are constantly exposed to rain, temperature changes, and environmental stress, which can lead to cracks, leaks, efflorescence, and structural deterioration if not properly protected.

This service ensures a fully sealed and durable surface that protects both the balcony structure and the interior spaces below. Proper waterproofing helps maintain structural integrity, prevents water damage, and extends the lifespan of finishes and concrete elements.